Мощност
Подход към performance потенциала с ясна цел, правилни компоненти и реалистичен път на развитие.
BoostHaus BG x Power Division
Power Division Bulgaria
4.0 TFSI performance solutions for cars where compromise is not an option.
Premium solutions for the Audi RS6, RS7, RSQ8, SQ7 and SQ8, Lamborghini Urus, Porsche Panamera and other EA825 vehicles, with personal advice from BoostHaus BG.
EA825 платформа
Built for the EA825 platform
The 4.0 TFSI platform has enormous potential. The right result comes from matching hardware, software, cooling, fueling and calibration.
Надеждност
Фокус върху температури, гориво, охлаждане и калибрация, защото силният setup трябва да остане стабилен.
Правилен подбор
Избор на части според автомобила, текущото състояние и реалната цел, а не по универсална рецепта.
Power path
Избери автомобил и виж посоката
Виж примерен performance път от заводска мощност до сериозен Power Division проект. Стойностите са ориентировъчни и зависят от конкретния автомобил, гориво, хардуер и калибрация.
EA825
4.0 TFSI / EA825
Audi RS6 Avant C8
The RS6 C8 is a strong base for a high-power road build focused on cooling, intake, downpipes, fueling and the right ECU/TCU calibration.
Stock HP
600 hp
Stage 4 HP
1070 hp
Общо увеличение
+470 hp
Процент
+78%
Enquire about this vehicle
Посочените мощности и цени са ориентировъчни. Реалната мощност и крайната цена зависят от конкретния автомобил, гориво, хардуер, софтуерна версия, избраната конфигурация, доставка и наличност. За точна оферта изпратете запитване към BoostHaus BG.
Stage път
Път от Stage 1 до Stage 4
Stage 1
Software foundation
ECU/TCU optimization for better response, more torque and stronger everyday performance.
Stage 1+
Supporting upgrades
Complementary parts and cooling for a more stable foundation before a larger hardware build.
Stage 2
Supporting hardware
Intake, downpipes and cooling to support more consistent power.
Stage 2+
Advanced hardware setup
A more extensive parts selection when temperatures, fueling and airflow become critical.
Stage 3
Turbochargers and fueling
Upgraded turbochargers, fueling and key components for substantially greater performance potential.
Stage 4
High-power configuration
A complete high-power setup for serious 4.0 TFSI builds, planned around the specific car and goal.
Продуктова вселена
Power Division продуктова вселена
Carbon intake systems
Airflow, sound and a strong foundation for future performance upgrades.
Turbochargers
Turbo solutions for significantly greater potential in EA825 builds.
Intercoolers
Cooling that helps keep power consistent under real load.
Downpipes
Key hardware for a Stage 2+ build and more efficient exhaust flow.
Fuel systems
Fueling solutions for builds that exceed the capabilities of the standard system.
MAP sensors
Supporting parts for accurate calibration at higher boost pressure.
Spark plugs
Small but important parts for stable operation in more demanding builds.
Water - Methanol Injection
Calibration matched to the hardware, fuel, goals and how the vehicle will be used.
Избрани продукти
Избрани Power Division продукти
BoostHaus консултация
No two 4.0 TFSI builds start with the same part.
At BoostHaus BG, we start with your vehicle, current modifications, goals, budget and how you use the car. Then we prepare a suitable Power Division proposal.
Enquire about your 4.0 TFSI buildПроцес
Как работим по 4.0 TFSI проект
- 01
Изпращаш информация за автомобила
- 02
Уточняваме текущите модификации
- 03
Избираме правилната Power Division посока
- 04
Подготвяме индивидуална оферта
- 05
Координираме доставка и техническа комуникация
Въпроси
Често задавани въпроси
Is this suitable for my car?
If your car has a 4.0 TFSI / EA825 engine, we can check the right Power Division path for its model, current modifications and your goals.
Do I need to buy a complete Stage package?
No. We can start with the right parts for your current goal and build the project in stages.
Can BoostHaus help me choose?
Yes. We first discuss your car, budget and driving needs, then recommend a realistic configuration.
How long does delivery take?
It depends on the product and stock availability. We’ll confirm an estimated lead time before you order.
Can I order products after an enquiry?
Yes. Some Power Division solutions are planned around individual builds, so we discuss the details before a final quote.
Do I need help planning installation?
For more extensive 4.0 TFSI builds, we recommend planning installation and technical coordination in advance.
Can I start with Stage 1 only?
Yes. Stage 1 is a logical first step when the car is in good technical condition and you want stronger performance without major hardware changes.
Следваща стъпка
Ready to plan your 4.0 TFSI build?
Tell us about your car and your goals. We’ll help you choose the right Power Division configuration.
Send an enquiry